Analisis Sistem Pengereman Singaperbangsa Electric Vehicle
Main Article Content
Abstract
Electric cars are vehicles that use an electric motor as the main source of power to move the vehicle. In an electric car, braking is also required. The braking that is usually used in competitions is how the braking is maximal or not maximal during a race over a predetermined distance, and there are many different types of braking that are used, some of which use disc brakes. Therefore, a test was carried out on the influence of speed on braking results in electric cars. The aim of this research is to investigate the effect of speed on the braking results of the Singaperbangsa Electric Vehicle Bersama electric car over a predetermined distance. To determine the effect of speed on braking results, researchers carried out tests by carrying out braking tests with a predetermined track distance of 15 meters with speed variations of 30 km/hour, 40 km/hour and 50 km/hour.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
A. Efendi, "Rancang Bangun Mobil Listrik Sula Politeknik Negeri Subang," Jurnal Pendidikan Teknologi dan Kejuruan, vol. 17, no. 1, pp. 75-84, 2020.
M. Yusron, “Perancangan Sistem Pengereman Hidrolis Pada Mobil Urban Diesel,” Tugas Akhir, Univ. Muhammadiyah Malang, Malang, Indonesia, 2015.
E. Pranoto, A. M. Hidayat, dan F. Humami, M. I. Nurhakim, “Komparasi Efisiensi (Static Brake Test) dan pengujian Rem Jalan (Road Brake Test)”, J. Keselamatan Transportasi Jalan., vol.7 No.1, hal. 19-25, Juni 2020.
D. Meitryano, Syafitri, dan K. Annuar, “Analisis Sistem Pengereman Pada Mobil Hemat Energi Bono Kampar”, J. FTeknik Vol. 5, No.2, Hal.1, Desember 2018.
B. D. Prayoga, H. Poernomo, and F.Bisono, ³Perancangan Dan Analisis Sistem Pengereman Hydraulic Pada Mobil Minimalis Roda Tiga,´ Conf. Des. Manuf. Its Apl., vol. 1, Hal. 94, Januari 2018.
A. Khumaedi, N. Soedjarwanto, and A. Trisanto, “Otomatisasi Pengereman Motor DC Secara Elektris Sebagai Referensi Sistem Keamanan Mobil Listrik,” J. Rekayasa dan Teknol. Elektro, vol. 8, no. 1, pp. 31–36, 2014.
L. Tuxuci, D. Rem, and C. Doubel, “Pengaruh Pengereman Terhadap Kecepatan Mobil,” vol. 4, pp. 83–87, 2015.
T. Hardianto, H. Sutjahjono, H. Arbiantara, and M. E. Ramadhan, “Perhitungan Energi Kinetik Pada Sistem Pengereman Regenerative Mobil Listrik,” J. ROTOR, vol. 8, no. 1, pp. 2013–2016, 2015.
A. R. Dayus, J. E. Hutagalung, and I. R. Harahap, “Penerapan Sistem Pengereman dan Parkir Mobil Listrik Menggunakan Sensor Ultrasonik Berbasis Arduino UNO,” J-Com (Journal Comput., vol. 2, no. 2, pp. 101–106, 2022.
B. Setyono and Y. Setiawan, “Rancang Bangun Sistem Transmisi, Kemudi dan Pengereman Mobil Listrik ‘Semut Abang,’” Semin. Nas. Sains dan Teknol. Terap. III 2015, p. Hal 89-96, 2018.
I. M. Muliatna and P. N. Cahyo, “Perancangan Sistem Pengereman Hidrolis Pada Mobil Listrik Garnesa,” J. Rekayasa Mesin, vol. 01, no. 01, pp. 54–56, 2013.
M. & A. S. Sirajuddin, “Analisis Sistem Pengereman Pada Mobil Mitsubishi L300 Jenis Pick-Up Mustofa & Awal Syahrani Sirajuddin,” J. Mek., vol. 2, no. 1, pp. 189–195, 2010.
A. N. Akhmadi, “Pengaruh Pengereman Terhadap Kecepatan Mobil Listrik Tuxuci 2.0 Dengan Rem Cakram Doubel Piston,” J. Nozzle, vol. 4, no. 2, pp. 83–87, 2015.
M. Adriana, A. A. B.P, and M. Masrianor, “Rancang Bangun Rangka (Chasis) Mobil Listrik Roda Tiga Kapasitas Satu Orang,” J. Elem., vol. 4, no. 2, p. 129, 2017.