Analisa Seat Trunnion tidak Bisa dipasang Spring di PT. XYZ
Main Article Content
Abstract
PT. XYZ is a company consisting of several departments, one of which is machining and assembly. The ongoing industrial developments make companies compete to innovate the best in order to survive and compete with similar companies. Consumers will have more choices in choosing products because there is more competition in the business world. Therefore, in order to remain competitive and be able to survive longer than competition with other products. The purpose of this research is to determine various types of defects, the causes of defects, and provide replacement suggestions for improvement. The research results show that there are types of defects in the trunnion parts on the assembly line. Based on the fishbone diagram, the factors that cause product defects are human, machine and method factors. The proposal given in this research is to make parts or make tools such as the Go Nogo Jig Dummy Spring on a conveyor machine that is attached.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Husaini, R. H. Liza, A. Nurdin, and S. Muammar, “Failure analysis of a fractured leaf spring as the suspension system applied on the dump truck,” Key Eng. Mater., vol. 892, no. July, pp. 89–98, 2021.
N. S. Nursyifaa, “Analisis Penerapan Lean Manufacturing Untuk Menghilangkan Pemborosan Di PT. Hino Motors Manufacturing Indonesia,” Sci. Juournal Ind. Eng., vol. 2, no. 2, pp. 30–33, 2021.
Simanjuntak, Albert Ishac Einstein, Ismoyo Haryanto, and Toni Prahasto. "Analisis Performa Cornering Medium Duty Truk Dengan Suspensi Leaf Spring Melalui Metode Multibody Dynamics (MBD) Simulation." Jurnal Teknik Mesin 9.4 (2021): 475-482.
M. F. Baisalim and D. Soediantono, “Literature Review of Quality Control Circle (QCC) and Implementation Recommendation to the Defense Industries,” J. Ind. Eng. Manag. Res., vol. 3, no. 2, pp. 61–72, 2022.
M. M. Ulkhaq, S. N. W. Pramono, and R. Halim, “Aplikasi Seven Tools Untuk Mengurangi Cacat Produk Pada Mesin Communite Di PT. Masscom Graphy, Semarang,” J. PASTI, vol. XI, no. 3, pp. 220–230, 2017.
G. Kudo and T. Y. Ida, “Early onset of spring increases the phenological mismatch between plants and pollinators,” Ecology, vol. 94, no. 10, pp. 2311–2320, 2013.
J. R. Berstock, M. R. Whitehouse, and C. P. Duncan, “Trunnion corrosion: What surgeons need to know in 2018,” Bone Jt. J., vol. 100B, no. 1, pp. 44–49, 2018, doi: 10.1302/0301-620X.100B1.BJJ-2017-0569.R1.
S. Munir, W. L. Walter, and W. R. Walsh, “Variations in the trunnion surface topography between different commercially available hip replacement stems,” J. Orthop. Res., vol. 33, no. 1, pp. 98–105, 2015.
Y. Cohen, M. Faccio, F. Pilati, and X. Yao, “Design and management of digital manufacturing and assembly systems in the Industry 4.0 era,” Int. J. Adv. Manuf. Technol., vol. 105, no. 9, pp. 3565–3577, 2019.
Abdul Rahman Agung Ramadhan and Eko Aprianto Nugroho, “Proses Pembuatan Housing Bearing Gearbox 3Z2M21 Dengan Material Fcd 400,” J. Ilm. Tek., vol. 2, no. 1, pp. 20–28, 2023.
N. Cong et al., “Changes in satellite-derived spring vegetation green-up date and its linkage to climate in China from 1982 to 2010: A multimethod analysis,” Glob. Chang. Biol., vol. 19, no. 3, pp. 881–891, 2013.
Mirajhusnita, Isradias, et al. "Pengembangan Alat Bantu Mesin Cutting Besi Dengan Sistem Conveyor Sliding Menggunakan Metode Rula Dan Reba Untuk Mengurangi Risiko Gangguan Muskoloskeletal." JITEK (Jurnal Ilmiah Teknosains) 9.2/Nov (2023): 29-33.
A. Puspasari, D. Mustomi, and E. Anggraeni, “Proses Pengendalian Kualitas Produk Reject dalam Kualitas Kontrol pada PT. Yasufuku Indonesia Bekasi,” Widya Cipta J. Sekr. dan Manaj., vol. 3, no. 1, pp. 71–78, 2019.
Rosihan, Rifda Ilahy, and Wihda Yuniawati. "Simulasi Antrian Pada Antrian Farmasi Di Rumah Sakit X Dengan Software Promodel." Jurnal Rekavasi 9.1 (2021): 65-74.