Analisa Perbaikan Fasilitas Kerja Operator Mesin Sanding dengan Metode BRIEF Survey dan PLIBEL Checklist untuk Meminimalkan Musculosceletal Disorders (Studi Kasus Pada KMH Co.Ltd)
Main Article Content
Abstract
In the production process at KMH Co. Ltd. there are still many activities that are not ergonomic and which can repeatedly cause the risk of MSDs complaints and fatigue caused by work facilities that do not meet standards. This research uses quantitative data obtained from observations. The methods used are BRIEF Survey and PLIBEL Checklist. Starting with filling out the Nordic Body Map Questionnaire with the results of operator 2 having the highest score of 70. The results obtained by the BRIEF Survey factor were 2.8% for operator 2, while with an assessment using the PLIBEL Checklist it was obtained that 2 body parts were at risk of developing MSDs in the third operator on the sanding machine, namely the legs for operators 1 and 2 amounted to 92% and 84%, while for operator 3 on the lower back of the bag the figure reached 78%. So as a result of the recapitulation, there needs to be a complete overhaul of the facilities, namely increasing the length of the conveyor from 2m to 4m, increasing the height of the pallet bin from 2cm to 5cm, leaving the machine which previously had no support at a height of around 15cm.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
R. Luthfian, R. Silalahi, D. Firmansyah, and P. Deoranto, “Desain Perbaikan Fasilitas Aktivitas Pemotongan Tempe Berdasarkan Analisis Postur Kerja dan Antropometri,” Semin. dan Konf. Nas. IDEC, pp. 7–8, 2018.
D. M. Tamara, E. Achiraeniwati, and Y. S. Rezeki, “Perancangan Fasilitas Kerja Ergonomis pada Stasiun Kerja Pengeleman untuk Mengurangi Resiko Musculoskeletal Disorders (MSDs),” Pros. Tek. Ind., vol. 4, no. 2, pp. 481–488, 2018.
Muhammad Fikri Boy, Eri Achiraeniwati, and Selamat, “Perancangan Fasilitas Kerja Polishing untuk Mengurangi Gangguan Muskuloskeletal di CV X,” J. Ris. Tek. Ind., pp. 59–66, 2023, doi: 10.29313/jrti.v3i1.1973.
. E., R. Ginanjar, and . S., “Resiko Ergonomi Dengan Gejala MSDS Pada Karyawan Pabrik Midper,” Promotor, vol. 4, no. 3, pp. 208–218, 2021, doi: 10.32832/pro.v4i3.5588.
S. Adi and F. Yuamita, “Analisis Ergonomi Dalam Penggunaan Mesin Penggilingan Pupuk Menggunakan Metode Quick Exposure Checklist Pada Pt. Putra Manunggal Sakti,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. I, pp. 22–34, 2022, doi: 10.55826/tmit.v1ii.7.
Jubaedi, Ahmad. "Analisa Risiko Musculoskeletal Disorders (MSDs) Pada Pekerja Penggilingan Padi." Jurnal Kesehatan 1.4 (2016): 211-216.
F. Kurniawan and K. Kusnadi, “Usulan Perbaikan Fasilitas Kerja dengan Pendekatan Ergonomi pada UMKM Bani Marfu Farm,” J. Ilm. Wahana Pendidik., vol. 8, no. 1, pp. 391–402, 2022, doi: 10.5281/zenodo.6553375.
Putri Pertiwi and Zeny Fatimah Hunusalela, “Rancangan Perbaikan Stasiun Kerja Di Pt Karsa Wijaya Pratama Dengan Menggunakan Metode Plibel Checklist Dan Qec (Quick Exposure Check),” J. Indones. Sos. Teknol., vol. 1, no. 3, pp. 184–197, 2020, doi: 10.36418/jist.v1i3.24.
D. Ramdhani and P. M. Zalynda, “, penilaian terhadap lengan bawah ( Lower Arm ) membentuk sudut sekitar 60,” Institutional respositories Sci. journals, pp. 1–13, 2018.
B. M. Dewi, “Hubungan Antara Motivasi, Beban Kerja, Dan Lingkungan Kerja Dengan Kelelahan Kerja,” Indones. J. Occup. Saf. Heal., vol. 7, no. 1, p. 20, 2018, doi: 10.20473/ijosh.v7i1.2018.20-29.
K. T. Sanjaya, S. Wahyudi, and R. Soenoko, “Mengurangi Musculoskeletal Disorders,” Jemis Vol. 1 No. 1 Tahun 2013, vol. 1, no. 1, pp. 31–34, 2013.
A. N. Etika, V. D. Audina, K. Ika, N. Rahayu, and U. Kadiri, “Pengaruh Ergonomics Exercise Terhadap Tingkat Resiko Musculosceletal Disorder ( MSDs ) Pada Karyawan Di Pabrik Pembalut Kain Di Kediri Tahun 2017,” Nsj, vol. 1, 2017.
D. R. Dalimunthe, U. N. Afifah, N. N. Azmi, A. D. Pratama, and L. N. Huda, “Perancangan Ulang Fasilitas Kerja Terkait Keluhan Otot Menggunakan Kuesioner Nordic Body Map dan Metode PLIBEL di PT. XYZ,” Talent. Conf. Ser. Energy Eng., vol. 5, no. 2, pp. 598–606, 2022, doi: 10.32734/ee.v5i2.1625.
Sasmito, Zinedine A., and Tranggono Tranggono. "Analisis Ergonomi Terhadap Keluhan Muskuloskeletal Disorders MSDS Pada Pekerjaan Welder Dengan Metode Brief." The Higher Education Press (2021).
W. Y. Rizki and Siswayanti, “Analisis Keluhan Musculoskeletal Pada Stasiun Kerja Mencanting Batik Dengan Metode Plibel Checklist,” Konf. Nas. Penelit. dan Pengabdi. Ke-3, pp. 444–450, 2023.