Development of a Portable Cool Box to Increase Milk Distribution Capacity
Main Article Content
Abstract
The SN Multipurpose Cooperative has a business of collecting pure cow's milk from dairy farmers. Milk is processed by cooling it to a certain temperature. Pure milk from cooperatives sent to milk factories can be rejected by milk factories for various reasons so that dairy farmers experience losses. The SN Multi-Business Cooperative carries out business development, namely pure milk is further processed by the cooperative into ready-to-drink processed milk products. Business development in the field of processing pure milk products will provide a greater selling value compared to pure milk sold directly to milk factories. Distribution and delivery of processed milk to consumers is carried out using motorbikes. To carry processed milk, every motorbike rider uses a basket bag made of thick cloth which is placed on the back and contains around 30 liters of milk. Inside this bag, ice cubes are placed to maintain the temperature of the processed milk. Over a long period of time the ice cubes will melt into water and seep into the basket bag and damage the basket bag. With the development of a portable toll box, it is possible to maintain milk temperature for longer as well as anthropometric arm length and upwards. The cool box installed on the motorbike is equipped with foam in the cooling box. The distributed capacity is greater to 64 liters.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
E. N. Hayati, M. Riza Radyanto, F. A. Ekoanindiyo, and E. Prihastono, “Portable Coolbox Design for Milk Storage,” J. Appl. Eng. Technol. Sci., vol. 4, no. 1, pp. 561–567, 2022.
A. Mustakim et al., “Pembuatan Cool Box Portable dengan Sistem Pendingin Air Guna Mendukung Cold Chain pada Distribusi Ikan dan Menjaga Kualitas Ikan Tangkapan Nelayan,” Sewagati, vol. 7, no. 1, pp. 56–66, 2022.
G. K. Naufal, “Rancang Bangun Cooler Box Termoelektrik Dengan Air Sterilizer Sebagai Tempat Pengiriman Air Susu Ibu (Asi),” J. Rekayasa Mesin, vol. 14, no. 3, p. 87, 2019.
E. Prihastono, A. Yohanes, and F. A. Ekoanindiyo, “Solar Corn Sheller Machine Design Based on Ergonomics Principles,” J. Serambi Eng., vol. VIII, no. 4, pp. 6923–6928, 2023.
F. A. Ekoanindiyo, A. Yohanes, and E. Prihastono, “Perancangan Mesin Pemipil Jagung Ramah Lingkungan Dengan Pendekatan Nordic Body Map,” J. Rekayasa Sist. Ind., vol. 6, no. 1, pp. 26–31, 2020.
F. A. Ekoanindiyo, A. Yohanes, and E. Prihastono, “Pengembangan Desain Mesin Pemipil Jagung Tenaga Matahari,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 22, no. 2, p. 283, 2022.
K. Febriansyah, “Perancangan Cooler Bag ASI (Air Susu Ibu) Otomatis Menggunakan Thermoelectric Berbasis Arduino,” Skripsi, 2022.
M. G. Suryanata and K. Ibnutama, “Lemari Pendingin Portable Untuk Penyimpanan Air Susu Ibu (Asi) Menggunakan Termoelektrik,” JURTEKSI (Jurnal Teknol. dan Sist. Informasi), vol. 7, no. 1, pp. 53–60, 2020.
K. F. Hafeze and F. A. Ekoanindiyo, “Design Of Portable Lawn Mower Using Rapid Entire Body Assessment (Reba) Method,” J. Sains, Teknol. dan Ind. Sains, Teknol. dan Ind., vol. 21, no. 1, pp. 27–34, 2023.
Y. K. Luqiana, B. P. Manunggal, I. Yuliyani, and K. Kunci, “Pembuatan sistem pendingin pada cooling box untuk penyimpanan vaksin Sinovac dengan Thermoelctric (TEC) 1-12706 yang disusun paralel,” Ind. Res. Work. Natl. Semin., pp. 302–307, 2021, [Online]. Available: https://jurnal.polban.ac.id/ojs-3.1.2/proceeding/article/view/2709/2097
B. Praditya and F. A. Ekoanindiyo, “Perancangan Alat Penyangrai Biji Melinjo Menggunakan Metode RULA (Rapid Upper Limb Assessment) Di UMKM Melinjo Sukorejo,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 9, no. 2, pp. 521–528, 2023.
D. N. Mustika, S. Nurjanah, and Y. N. S. Ulvie, “Identifikasi Total Bakteri dan Keasaman Air Susu Ibu Perah (ASIP) yang disimpan di Cooler Bag,” J. Gizi, vol. 8, no. 1, pp. 28–36, 2019.
E. N. Hayati, F. A. Ekoanindiyo, and M. R. Radyanto, “Peningkatan Kualitas Produk IKM Rumah Sabun Dengan Pendekatan QFD,” J. Rekayasa Sist. Ind., vol. 8, no. 1, pp. 13–21, 2021.
F. A. Ekoanindyo, A. Yohanes, and R. Ernawati, “Perancangan Mesin Pembersih Usus Untuk Mengingkatkan Produktivitas Di UKM Kabupaten Batang,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 20, no. 2, pp. 196–202, 2020.
A. Yohanes and F. A. Ekoanindyo, “Perancangan Mesin Pemotong Plastik Gulung Semi Otomatis Dengan Anthropometri,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 20, no. 2, p. 132, 2020.