Pengaruh Variasi Waktu Milling terhadap Temperatur Nanokomposit Fe3O4 - MgH2 sebagai bahan baku katalis pada Tabung Hydrogen Storage
Main Article Content
Abstract
Metal materials can be used in renewable energy with future technologies for safe hydrogen storage media. Metal hydrides are a safe and effective way to store hydrogen for vehicle applications. Due to its high capacity in mass and volume for hydrogen storage, metal hydrides are currently the subject of intense research. However, the thermodynamic properties of magnesium hydride (MgH2) produce moderate temperatures, during the hydrogen desorption reaction reaching about 3000C to 4150C at 1 bar. The thermodynamic properties of high MgH2 cause the desorption temperature to also increase. The enthalpy produces high desorption (about 74 KJ/mol H2). In addition, the process of transforming magnesium into magnesium hydride takes a long time, (for 60 hours). From the results of the study, iron sand, a material from nature, which has been extracted into Fe3O4 powder, is used as a catalyst. This is done to improve the absorption properties and reaction kinetics of hydrogen storage materials based on MgH2, namely magnetite Fe3O4. The yield of Magnetite Extraction (Fe3O4) from iron sand is 85% purity, compared to the purity of Iron sand before extraction, which is 81%. Mechanical alloying methods are used to process MgH2-Fe3O4 samples, with different milling times and different catalysts.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Jalil Z, Rahwanto A, Sofyan H, Usman M, Handoko E. The use of Silica from beach sand as catalyst in Magnesium based hydrides for Hydrogen storage materials. In IOP Conference Series: Earth and Environmental Science 2018 (Vol. 105, No. 1, p. 012093). IOP Publishing.
Wulandari IO, Mardila VT, Santjojo DD, Sabarudin A. Preparation and characterization of chitosan-coated Fe3O4 nanoparticles using ex-situ co-precipitation method and tripolyphosphate/sulphate as dual crosslinkers. In IOP Conference Series: Materials Science and Engineering 2018 Jan 1 (Vol. 299, p. 012064). IOP Publishing.
Arianti, Myrna. 2011. Slide Thermal Analysis, Karakterisasi Material 2. Departemen Metalurgi UI.
Ali, Jauhari. 2012. Pengembangan Adsorben Hydrogen Storage untuk Aplikasi Fuell Cell dalam Bentuk Padatan Partikel Nano Karbon Aktif dengan Bahan Pengikat Likuida Lignoselulosa. Tesis. Magister Depok Jakarta.
Rahwanto A, Jalil Z, Handoko E. Desorption properties of mechanically milled MgH2 with double catalysts Ni and SiC. In IOP Conference Series: Materials Science and Engineering 2020 Sep 1 (Vol. 931, No. 1, p. 012012). IOP Publishing.
Pratama FB, Widyastuti W. Pengaruh Penambahan Ni, Cu, dan Al dan Waktu Milling pada Mechanical Alloying Terhadap Sifat Absorpsi dan Desorpsi Mg sebagai Material Penyimpan Hidrogen. Jurnal Teknik ITS. 2012 Sep 11;1(1): F97-101.
Budi, Febrian Pratama dan Widyastuti. 2012. Pengaruh Penambahan Ni, Cu dan Al dan Waktu Milling pada Mechanical Alloying Terhadap Sifat Absorpsi dan Desorpsi Mg sebagai Material Penyimpan Hidrogen. Jurnal Teknik ITS Vol. 1, (Sept, 2012) ISSN: 2301-9271
Monshi A, Foroughi MR, Monshi MR. Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD. World journal of nano science and engineering. 2012 Sep 28;2(3):154-60.
Sari N, Fadlly TA, Maulinda M. Pengaruh Waktu Milling Terhadap Sifat Desorpsi Material Penyimpan Hidrogen MgH2-Ni Melalui Teknik Mechanical Alloying. Jurnal Serambi Engineering. 2021 Jun 26;6(3).
Istadi. 2011. Teknologi Katalis untuk Konversi Energi. Graha Ilmu, Yogyakarta
Sunaryono, Taufiq A, Mashuri M, Pratapa S, Zainuri M, Triwikantoro T, Darminto D. Various magnetic properties of magnetite nanoparticles synthesized from iron-sands by coprecipitation method at room temperature. InMaterials Science Forum 2015 Sep 12 (Vol. 827, pp. 229-234). Trans Tech Publications Ltd.
Mahdavi M, Ahmad MB, Haron MJ, Namvar F, Nadi B, Rahman MZ, Amin J. Synthesis, surface modification and characterisation of biocompatible magnetic iron oxide nanoparticles for biomedical applications. Molecules. 2013 Jun 27;18(7):7533-48.
Jalil Z. Material Penyimpan Hidrogen Sistem MgH2-SiC Yang Dipreparasi Melalui Rute Reactive Mechanical Alloying. Disertasi. Universitas Indonesia Jakarta. 2011.
Maulinda M, Zein I, Jalil Z. Characteristics of Natural Magnetite (Fe3O4) from Beach Sand as Catalyst Application in Materials Industry. Jurnal Natural. 2019 Mar 14;19(1):1-5.
Fatmaliana A, Maulinda M, Sari N. Synthesis and characterization of hematite (Fe2O3) of iron ore and magnetite (Fe3O4) from iron sand through precipitation method for industrial raw materials. Jurnal Neutrino: Jurnal Fisika dan Aplikasinya. 2020 Jun 30;12(2):37-42.