Perancangan Mesin Hammer Mill pada Aplikasi Pengolah Garri Mobile di PT. XYZ

Article Sidebar

pdf
Published: Dec 22, 2023
DOI: https://doi.org/10.32672/jse.v9i1.756
Keywords:
perancangan, pengolahan garri mobile, mesin hammer mill, lokasi terpencil, singkong

Main Article Content

Shalahudin Akmarullah
Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang
Kardiman
Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang

Abstract

This study presents the design of a mobile hammer mill machine for processing Garri, a popular cassava-based food product, at PT. XYZ. The objective of the research is to develop a compact and mobile solution that enables efficient Garri processing in remote locations. The design incorporates key features such as portability, robustness, and ease of operation, ensuring optimal performance and productivity. The proposed machine has the potential to enhance the Garri processing industry by providing a flexible and reliable solution for small-scale and mobile production units. The research obtained a hammer mill machine design that can be applied to the Garri processing AMMDes with dimensions of 1157 mm x 985 mm x 850 mm and the rotating parts can be covered.

Article Details

How to Cite
[1]
Shalahudin Akmarullah and Kardiman, “Perancangan Mesin Hammer Mill pada Aplikasi Pengolah Garri Mobile di PT. XYZ”, JSE, vol. 9, no. 1, pp. 7838 –, Dec. 2023.
Issue
Vol. 9 No. 1 (2024): Januari 2024
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

E. C. Reynaldi, “Meminimalisir Gangguan Dengan Maintenance Pada Hammer Mill Di PT. Charoen Pokphand Indonesia Tbk Krian,” J. Energi Dan Manufaktur, vol. 15, no. 2, p. 77, 2023, doi: 10.24843/jem.2022.v15.i02.p02.

U. Performansi et al., “Penepungan Hotong ( Setaria Italica L .) Performance Test of Hammer Mill Machine for Hotong Flour ( Setaria italica L .),” Jurnal Agricultural Biosystem Engineering 2023.

Adriansyah, Junaidi, and Mulyadi, “Pengembangan Mesin Penggiling Jagung Jenis Buhr Mill Sistem Hantaran Screw Dan Penggilingan Plat Bergerigi,” Semin. Nas. Sains dan Teknol., vol. 9, no. November, pp. 1–6, 2014.

Zulkarnain, Rifki, Sugeng Slamet, and Taufiq Hidayat. "Perancangan Mesin Hammer Mill Penghancur Bongkol Jagung Dengan Kapasitas 100kg/jam Sebagai Pakan Ternak." Prosiding SNATIF (2014): 75-82.

W. Rahmadian.O, Triyono.S, “Uji Kinerja Hammer Mill Dengan Umpan Janggel Jagung [Performence Test Hammer Mill With Corn Feed Corncob],” J. Tek. Pertan. Lampung, vol. 1, no. 1, pp. 1–1, 2012.

W. Mudriadi, “Perancangan mesin penggiling sekam padi dengan metode mekanisasi penggilingan hammer mills,” e-Prosiding Seminar Nasional Teknologi Industri VIII 2021. pp. 1–6, 2021.

D. Ardiansyah, M. Ibrahim, M. S. Sidiq, and K. R. Diptaseptian, “Optimasi Setting Posisi Screen dan Blower terhadap Kapasitas serta Granulasi pada Proses Grinding di PT. Malindofeedmill, Tbk Grobogan,” Accurate J. Mech. Eng. Sci., vol. 1, no. 2, pp. 13–18, 2020, doi: 10.35970/accurate.v1i2.327.

M. S. Putri and T. Taali, “Rancang Bangun Alat Pengering Biji Kakao dengan Pengendalian Kelembaban dan Suhu Berbasis Arduino Mega 2560,” JTEIN J. Tek. Elektro Indones., vol. 3, no. 1, pp. 147–157, Feb. 2022, doi: 10.24036/jtein.v3i1.224.

K. Anwar and Y. Umardani, “Pengujian Sifat Mekanis Dan Struktur Mikro Pisau Hammer Mill Pada Mesin Penggiling Jagung PT. Charoen Pokphand Indonesia Cabang Semarang,” Jurnal Foundry pp. 21–26.

M. Nasih, I. Qiram, and A. Mukhtar, “Pengaruh Dimensi Ujung Pemukul Terhadap Penggilingan Kulit Kerang Dengan Mesin Hammer Mill,” V-MAC (Virtual Mech. Eng. Artic., vol. 6, no. 1, pp. 26–29, 2021, doi: 10.36526/v-mac.v6i1.1152.

I. Indriyani, “Peningkatan Kemampuan Mesin Hamer Mill Pengupas Coklat Kapasitas 100 Kg Per Jam,” Tek. Sains J. Ilmu Tek., vol. 4, no. 1, pp. 41–48, 2019, doi: 10.24967/teksis.v4i1.638.

M. Subhan, Z. Kurniawan, and S. D. Krishnaningsih, “Mesin Penumbuk Tepung Mocaf dengan Sistem Rack And Gear,” Manutech J. Teknol. Manufaktur, vol. 11, no. 2, pp. 64–69, 2019.

S. J. Nugroho et al., “Characterization blade hammer mill type swing,” J. Tek. Mesin, vol. 3, no. 4, pp. 376–381, 2015.

H. Santosa, “Alat Hammer Mill-Strainer Combined Pada Pengolahan Ampas Kelapa Sisa Proses Pembuatan Minyak Kelapa Murni (Virgin Coconut …,” Pros. Semin. Nas. Ris. dan Teknol. …, pp. 1–8, 2021, [Online]. Available: https://journal.unpar.ac.id/index.php/ritektra/article/view/4965

L. Hakim, Japri, and A. Ridwan, “Perancangan Mesin Penghalus Tempurung Biji Buah Kelapa Sawit (Endocarp Crusher Hammer Mill) Untuk Komposisi Bahan Bakar Alternatif,” J. Surya Tek., vol. 6, no. 1, pp. 55–63, 2020, doi: 10.37859/jst.v6i1.1868.