Desain dan Simulasi Kendali PID Kecepatan Motor Mesin Sentrifugasi
Main Article Content
Abstract
Centrifugal machines perform centrifugation by rapidly spinning materials using a motor. This study aims to identify the optimal control parameters (kp, ki, kd) for maintaining the stability of centrifugal machine operations using PID control. The transfer function of the centrifugation motor was obtained using the System Identification Tool (SIT) in Matlab. The transfer function was obtained by measuring several variations in the input and output of the centrifuge machine motor. The PID parameters were determined using the Ziegler-Nichols method, resulting in the following values: kp=18, kd=12, ki=6.3. The performance of the PID control system was tested and the results were as expected: overshoot = 9%, rise time = 3.87 seconds, and steady-state error = 2%. The system identification approach successfully determined the PID parameters and control performance to meet the desired motor requirements.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Rahmawati, E. Kurniasih, Indrawati, and Gunawan, “Implementasi Mesin Sentrifugasi Kendali PID Pembuatan VCO Untuk Meningkatkan Produktivitas di IRT VCO-COCOK,” J. Vokasi, vol. 7, no. 1, pp. 107–114, 2023.
M. Aulia, P. Ali Topan, T. Andriani, and D. Maulidyawati, “Implementasi Sistem Kendali Proposional Integral Derivatif (PID) pada Porototype Pendeteksi Brightness Cahaya Ruangan Implementation of Proportional Integral Derivative (PID) Control System in Room Brightness Detection Prototype,” J. Bumigora Inf. Technol., vol. 4, no. 2, pp. 217–230, 2022, doi: 10.30812/bite.v4i2.2129.
M. Irhas, I. Iftitah, and S. A. Azizah Ilham, “Penggunaan Kontrol PID Dengan Berbagai Metode Untuk Analisis Pengaturan Kecepatan Motor Dc,” JFT J. Fis. dan Ter., vol. 7, no. 1, p. 78, 2020, doi: 10.24252/jft.v7i1.13846.
F. Suryatini and A. Firasanti, “Kendali P, PI, dan PID analog pada pengaturan kecepatan motor dc dengan penalaan ziegler-nichols,” JREC J. Electr. Electron., vol. 6, no. 1, pp. 65–80, 2018.
M. Diah Ika Putri, A. Ma’arif, and R. Dwi Puriyanto, “Pengendali Kecepatan Sudut Motor DC Menggunakan Kontrol PID dan Tuning Ziegler Nichols,” Techno (Jurnal Fak. Tek. Univ. Muhammadiyah Purwokerto), vol. 23, no. 1, 2022, doi: 10.30595/techno.v23i1.10773.
J. A. Prakosa, S. Suryadi, E. Kurniawan, and H. Adinanta, “Kajian Identifikasi Model Eksperimen pada Kontrol Kecepatan Motor DC,” J. Otomasi Kontrol dan Instrumentasi, vol. 13, no. 1, pp. 27–35, 2021, doi: 10.5614/joki.2021.13.1.3.
R. P. Borase, D. K. Maghade, S. Y. Sondkar, and S. N. Pawar, “A review of PID control, tuning methods and applications,” Int. J. Dyn. Control, vol. 9, no. 2, pp. 818–827, 2021, doi: 10.1007/s40435-020-00665-4.
V. V. Patel, “Ziegler–Nichols Tuning Method (Understanding the PID Controller),” Resonance, vol. 25, no. 10, pp. 1385–1397, 2020, doi: 10.1007/s12045-020-1058-z.
M. Jirgl, L. Obsilova, J. Boril, and R. Jalovecky, “Parameter identification for pilot behaviour model using the MATLAB system identification toolbox,” ICMT 2017 - 6th Int. Conf. Mil. Technol., pp. 582–587, 2017, doi: 10.1109/MILTECHS.2017.7988824.
A. Ma’arif, R. Istiarno, and S. Sunardi, “Kontrol Proporsional Integral Derivatif (PID) pada Kecepatan Sudut Motor DC dengan Pemodelan Identifikasi Sistem dan Tuning,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 9, no. 2, p. 374, 2021, doi: 10.26760/elkomika.v9i2.374.